B2479: BRAKE PARK SWITCH CIRCUIT SHORT TO GROUND

HighBodyBody Electronics

What does B2479 mean?

B2479 is a diagnostic trouble code indicating "BRAKE PARK SWITCH CIRCUIT SHORT TO GROUND". The ECU is detecting a voltage reading that is below the expected range in the body electronics circuit. This typically points to a wiring short, a faulty sensor, or a grounding issue.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • ABS warning light on
  • Brake pedal feels different
  • Unusual braking behaviour
  • Intermittent warning lights

Estimated repair cost

Typical range in Australia (parts + labour)

$200 – $1000 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed body electronics sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in the braking system. Your normal hydraulic brakes generally still work, but the electronics layered on top of them, ABS, EBD and emergency brake assist, can drop out. You will not notice until you brake hard or brake on a wet or loose surface, and that is the moment they would have helped. Treat the car as needing a workshop rather than as safe to drive, and get it looked at before your next real trip.

Get a diagnosis for YOUR car

Code B2479 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

B2478ANTI THEFT INPUT SIGNAL SHORT TO GROUND
B2477Module Configuration Failure
B2483Enable Signal Open Circuit
B2484Disable Signal Short to Ground