B2519: High Mount Stop Lamp Circuit Failure
MediumBodyLighting
What does B2519 mean?
B2519 is a diagnostic trouble code indicating "High Mount Stop Lamp Circuit Failure". The ECU is reading a voltage that is above the expected range. This can be caused by a short to power in the wiring, a failed sensor, or a connector issue in the lighting.
Symptoms you may notice
- Check engine light (MIL) illuminated on dashboard
- Intermittent warning lights
- Erratic gauge readings
Estimated repair cost
Typical range in Australia (parts + labour)
$100 – $500 AUD
Common causes
- Damaged or corroded wiring harness
- Loose or disconnected electrical connector
- Failed lighting sensor or actuator
- Blown fuse in the related circuit
- Poor ground connection
What should you do?
This code sits in the exterior lighting. Nothing about how the car drives changes, but how easily other road users see you does, and a light out is an on-the-spot fine and an inspection failure. Worth sorting before you next drive at night.
Get a diagnosis for YOUR car
Code B2519 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.