C1207: ABS Inlet Valve Coil Rear Circuit Open

HighChassisAnti-Lock Brakes

What does C1207 mean?

C1207 is a diagnostic trouble code indicating "ABS Inlet Valve Coil Rear Circuit Open". This means there is an electrical break in the anti-lock brakes wiring — a connector may be unplugged, a wire broken, or a component has failed internally. The ECU detected no signal where it expected one.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • ABS warning light on
  • Brake pedal feels different
  • Unusual braking behaviour
  • Intermittent warning lights

Estimated repair cost

Typical range in Australia (parts + labour)

$200 – $1000 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed anti-lock brakes sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in the braking system. Your normal hydraulic brakes generally still work, but the electronics layered on top of them, ABS, EBD and emergency brake assist, can drop out. You will not notice until you brake hard or brake on a wet or loose surface, and that is the moment they would have helped. Treat the car as needing a workshop rather than as safe to drive, and get it looked at before your next real trip.

Get a diagnosis for YOUR car

Code C1207 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

C1206ABS Inlet Valve Coil Rear Circuit Failure
C1208ABS Inlet Valve Coil Rear Circuit Short To Battery
C1205ABS Outlet Valve Coil Rear Circuit Short To Ground
C1209ABS Inlet Valve Coil Rear Circuit Short To Ground