C1750: Accelerator Position Sensor Out of Range

MediumChassisChassis Electronics

What does C1750 mean?

C1750 is a diagnostic trouble code indicating "Accelerator Position Sensor Out of Range". A sensor in the chassis electronics is reporting abnormal data or has lost communication with the ECU. Sensors can fail due to age, contamination, heat exposure, or wiring issues.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Intermittent warning lights
  • Erratic gauge readings

Estimated repair cost

Typical range in Australia (parts + labour)

$120 – $450 AUD

Common causes

  • Faulty chassis electronics component
  • Wiring or connector issue in the related circuit
  • Failed sensor providing incorrect readings
  • Software/calibration issue requiring ECU update
  • Related component causing secondary fault

What should you do?

This code sits in a powertrain control module. The engine or transmission can drop into limp mode or cut out, which is its own hazard in traffic or on a motorway. Get it diagnosed before your next trip rather than waiting for the next service.

Get a diagnosis for YOUR car

Code C1750 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

C1749Trailer Input Circuit Failure
C1751Vehicle Speed Sensor # 1 Output Circuit Short to Vbatt
C1748Switch input Circuit Short to Gnd
C1752Vehicle Speed Sensor # 1 Output Circuit Short to Gnd