C1761: Air Suspension Rear Height Sensor High (SE) Signal Circuit Open
MediumChassisSuspension
What does C1761 mean?
C1761 is a diagnostic trouble code indicating "Air Suspension Rear Height Sensor High (SE) Signal Circuit Open". This means there is an electrical break in the suspension wiring — a connector may be unplugged, a wire broken, or a component has failed internally. The ECU detected no signal where it expected one.
Symptoms you may notice
- Check engine light (MIL) illuminated on dashboard
- Intermittent warning lights
- Erratic gauge readings
Estimated repair cost
Typical range in Australia (parts + labour)
$80 – $400 AUD
Common causes
- Damaged or corroded wiring harness
- Loose or disconnected electrical connector
- Failed suspension sensor or actuator
- Blown fuse in the related circuit
- Poor ground connection
What should you do?
Schedule a diagnostic appointment at your earliest convenience. The vehicle is generally safe to drive short distances, but the underlying issue should be addressed to prevent it from worsening.
Get a diagnosis for YOUR car
Code C1761 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.
Related codes
C1760Air Suspension Rear Height Sensor High (SE) Signal Circuit Failure
C1762Air Suspension Rear Height Sensor High (SE) Signal Circuit Short To Battery
C1759Air Suspension Front Height Sensor High (SE) Signal Circuit Short To Ground
C1763Air Suspension Rear Height Sensor High (SE) Signal Circuit Short To Ground