C1898: Steering VAPS II Circuit Loop Open

HighChassisSteering

What does C1898 mean?

C1898 is a diagnostic trouble code indicating "Steering VAPS II Circuit Loop Open". This means there is an electrical break in the steering wiring — a connector may be unplugged, a wire broken, or a component has failed internally. The ECU detected no signal where it expected one.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Intermittent warning lights
  • Erratic gauge readings

Estimated repair cost

Typical range in Australia (parts + labour)

$80 – $400 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed steering sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in the steering system. Power assistance can cut out without warning, which makes the wheel go heavy, usually worst at parking and low speeds. Steering itself does not disappear, but the effort changes suddenly. Get it diagnosed before driving.

Get a diagnosis for YOUR car

Code C1898 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

C1897Steering VAPS II Circuit Loop Failure
C1899Steering VAPS II Circuit Loop Short To Battery
C1900Steering VAPS II Circuit Loop Short To Ground
C1917Steering EVO Out-of-Range Fault