P0032: Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 1

MediumPowertrainO2 Sensors

What does P0032 mean?

P0032 is a diagnostic trouble code indicating "Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 1". The ECU is reading a voltage that is above the expected range. This can be caused by a short to power in the wiring, a failed sensor, or a connector issue in the o2 sensors.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Decreased fuel efficiency
  • Rough or irregular idle
  • Engine running rough
  • Intermittent warning lights

Estimated repair cost

Typical range in Australia (parts + labour)

$200 – $500 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed o2 sensors sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in an engine peripheral, typically emissions or forced induction. It will not take braking or steering away, but it can put the car into limp mode, cost you fuel and fail a roadworthy. Book it in rather than clearing it and hoping.

Get a diagnosis for YOUR car

Code P0032 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

P0031Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 1 Sensor 1
P0030Heated Oxygen Sensor (H02S) Heater Control Circuit Bank 1 Sensor 1
P0036Heated Oxygen Sensor (HO2S) Heater Control Circuit Bank 1 Sensor 2
P0037Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 1 Sensor 2