P0153: O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)

MediumPowertrainO2 Sensors

What does P0153 mean?

P0153 is a diagnostic trouble code indicating "O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)". The ECU is detecting a voltage reading that is below the expected range in the o2 sensors circuit. This typically points to a wiring short, a faulty sensor, or a grounding issue.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Decreased fuel efficiency
  • Rough or irregular idle
  • Engine running rough
  • Intermittent warning lights

Estimated repair cost

Typical range in Australia (parts + labour)

$200 – $500 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed o2 sensors sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in an engine peripheral, typically emissions or forced induction. It will not take braking or steering away, but it can put the car into limp mode, cost you fuel and fail a roadworthy. Book it in rather than clearing it and hoping.

Get a diagnosis for YOUR car

Code P0153 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

P0152O2 Sensor Circuit High Voltage (Bank 2 Sensor 1)
P0154O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 1)
P0151O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1)
P0155O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)