P0383: Glow Plug/Heater Indicator Circuit
MediumPowertrainDiesel System
What does P0383 mean?
P0383 is a diagnostic trouble code indicating "Glow Plug/Heater Indicator Circuit". The ECU is detecting a voltage reading that is below the expected range in the diesel system circuit. This typically points to a wiring short, a faulty sensor, or a grounding issue.
Symptoms you may notice
- Check engine light (MIL) illuminated on dashboard
- Intermittent warning lights
- Erratic gauge readings
Estimated repair cost
Typical range in Australia (parts + labour)
$100 – $500 AUD
Common causes
- Damaged or corroded wiring harness
- Loose or disconnected electrical connector
- Failed diesel system sensor or actuator
- Blown fuse in the related circuit
- Poor ground connection
What should you do?
This code sits in an engine peripheral, typically emissions or forced induction. It will not take braking or steering away, but it can put the car into limp mode, cost you fuel and fail a roadworthy. Book it in rather than clearing it and hoping.
Get a diagnosis for YOUR car
Code P0383 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.