P0407: Exhaust Gas Recirculation Sensor B Circuit Low

MediumPowertrainEGR System

What does P0407 mean?

P0407 is a diagnostic trouble code indicating "Exhaust Gas Recirculation Sensor B Circuit Low". The ECU is detecting a voltage reading that is below the expected range in the egr system circuit. This typically points to a wiring short, a faulty sensor, or a grounding issue.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Intermittent warning lights
  • Erratic gauge readings

Estimated repair cost

Typical range in Australia (parts + labour)

$200 – $800 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed egr system sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in an engine peripheral, typically emissions or forced induction. It will not take braking or steering away, but it can put the car into limp mode, cost you fuel and fail a roadworthy. Book it in rather than clearing it and hoping.

Get a diagnosis for YOUR car

Code P0407 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

P0406Exhaust Gas Recirculation Sensor A Circuit High
P0408Exhaust Gas Recirculation Sensor B Circuit High
P0405Exhaust Gas Recirculation Sensor A Circuit Low
P0409Exhaust Gas Recirculation Sensor A Circuit