P0573: Cruise Control/Brake Switch A Circuit High
What does P0573 mean?
P0573 is a diagnostic trouble code indicating "Cruise Control/Brake Switch A Circuit High". The ECU is reading a voltage that is above the expected range. This can be caused by a short to power in the wiring, a failed sensor, or a connector issue in the braking system.
Symptoms you may notice
- Check engine light (MIL) illuminated on dashboard
- ABS warning light on
- Brake pedal feels different
- Unusual braking behaviour
- Intermittent warning lights
Estimated repair cost
Typical range in Australia (parts + labour)
Common causes
- Damaged or corroded wiring harness
- Loose or disconnected electrical connector
- Failed braking system sensor or actuator
- Blown fuse in the related circuit
- Poor ground connection
What should you do?
This code sits in the braking system. Your normal hydraulic brakes generally still work, but the electronics layered on top of them, ABS, EBD and emergency brake assist, can drop out. You will not notice until you brake hard or brake on a wet or loose surface, and that is the moment they would have helped. Treat the car as needing a workshop rather than as safe to drive, and get it looked at before your next real trip.
Get a diagnosis for YOUR car
Code P0573 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.