P0583: Cruise Control Vacuum Control Circuit Low

MediumPowertrainCruise Control

What does P0583 mean?

P0583 is a diagnostic trouble code indicating "Cruise Control Vacuum Control Circuit Low". The ECU is detecting a voltage reading that is below the expected range in the cruise control circuit. This typically points to a wiring short, a faulty sensor, or a grounding issue.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Intermittent warning lights
  • Erratic gauge readings

Estimated repair cost

Typical range in Australia (parts + labour)

$100 – $500 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed cruise control sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in a driver assistance system such as parking sensors, cruise control, tyre pressure monitoring or a camera. The car drives normally, but the assistance may be off or, worse, half working. Do not rely on it until it has been diagnosed.

Get a diagnosis for YOUR car

Code P0583 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

P0582Cruise Control Vacuum Control Circuit /Open
P0584Cruise Control Vacuum Control Circuit High
P0581Cruise Control Multi-Function Input A Circuit High
P0585Cruise Control Multi-Function Input A / B Correlation