P0043: HO2S Heater Control Circuit Low (Bank 1, Sensor 3)

MediumPowertrainO2 Sensors

What does P0043 mean?

P0043 is a diagnostic trouble code indicating "HO2S Heater Control Circuit Low (Bank 1, Sensor 3)". The ECU is detecting a voltage reading that is below the expected range in the o2 sensors circuit. This typically points to a wiring short, a faulty sensor, or a grounding issue.

Symptoms you may notice

  • Check engine light (MIL) illuminated on dashboard
  • Intermittent warning lights
  • Erratic gauge readings

Estimated repair cost

Typical range in Australia (parts + labour)

$100 – $500 AUD

Common causes

  • Damaged or corroded wiring harness
  • Loose or disconnected electrical connector
  • Failed o2 sensors sensor or actuator
  • Blown fuse in the related circuit
  • Poor ground connection

What should you do?

This code sits in an engine peripheral, typically emissions or forced induction. It will not take braking or steering away, but it can put the car into limp mode, cost you fuel and fail a roadworthy. Book it in rather than clearing it and hoping.

Get a diagnosis for YOUR car

Code P0043 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.

Download on iOSGet on AndroidUse on Web

Related codes

P0042HO2S Heater Control Circuit (Bank 1, Sensor 3)
P0044HO2S Heater Control Circuit High (Bank 1, Sensor 3)
P0041Oxygen Sensor Signals Swapped Bank 1 Sensor 2 / Bank 2 Sensor 2
P0040Oxygen Sensor Signals Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1