P0044: HO2S Heater Control Circuit High (Bank 1, Sensor 3)
MediumPowertrainO2 Sensors
What does P0044 mean?
P0044 is a diagnostic trouble code indicating "HO2S Heater Control Circuit High (Bank 1, Sensor 3)". The ECU is reading a voltage that is above the expected range. This can be caused by a short to power in the wiring, a failed sensor, or a connector issue in the o2 sensors.
Symptoms you may notice
- Check engine light (MIL) illuminated on dashboard
- Intermittent warning lights
- Erratic gauge readings
Estimated repair cost
Typical range in Australia (parts + labour)
$100 – $500 AUD
Common causes
- Damaged or corroded wiring harness
- Loose or disconnected electrical connector
- Failed o2 sensors sensor or actuator
- Blown fuse in the related circuit
- Poor ground connection
What should you do?
This code sits in an engine peripheral, typically emissions or forced induction. It will not take braking or steering away, but it can put the car into limp mode, cost you fuel and fail a roadworthy. Book it in rather than clearing it and hoping.
Get a diagnosis for YOUR car
Code P0044 can mean different things depending on your vehicle. TorqueBot gives you a diagnosis specific to your make, model, and year.